ELOM Notes

From Brandonhutchinson.com

(Difference between revisions)
Jump to: navigation, search
Line 21: Line 21:
* To start start a session on the server console, enter this command:
* To start start a session on the server console, enter this command:
start /SP/AgentInfo/console
start /SP/AgentInfo/console
 +
 +
== Network Boot ==
 +
 +
The first time you boot a system with ELOM, it will attempt a network boot because there is no OS on its hard disks. However, once an OS is installed, a network boot can be difficult from the ssh console.
 +
 +
I seem to be unable to send an '''F12''' via the ssh console to boot the system from the network. As a workaround, press '''F3''' during boot to bring up a menu of boot devices ("BBS POPUP").
 +
 +
Also, I recommend setting '''Quick Boot''' to '''Disabled''' within '''Boot'''/'''Boot Settings Configuration''' to give you more time to press the function keys during bootup.
== Links ==
== Links ==
* [http://docs.sun.com/source/819-6588-13/ Embedded Lights Out Manager Administration Guide]
* [http://docs.sun.com/source/819-6588-13/ Embedded Lights Out Manager Administration Guide]

Revision as of 21:44, 23 January 2008

Contents

Systems

ELOM (Embedded Lights Out Manager) is used on at least the following Sun systems:

  • Sun Fire X2200 M2
  • Sun Fire X2100 M2

Host Management

From Managing the Host:

  • To power on the host, enter the following command:
set /SP/SystemInfo/CtrlInfo PowerCtrl=on
  • To power off the host gracefully, enter the following command:
set /SP/SystemInfo/CtrlInfo PowerCtrl=gracefuloff
  • To power off the host forcefully, enter the following command:
set /SP/SystemInfo/CtrlInfo PowerCtrl=forceoff
  • To reset the host, enter the following command:
set /SP/SystemInfo/CtrlInfo PowerCtrl=reset
  • To reboot and enter the BIOS automatically, enter the following command:
set /SP/SystemInfo/CtrlInfo BootCtrl=BIOSSetup 
  • To start start a session on the server console, enter this command:
start /SP/AgentInfo/console 

Network Boot

The first time you boot a system with ELOM, it will attempt a network boot because there is no OS on its hard disks. However, once an OS is installed, a network boot can be difficult from the ssh console.

I seem to be unable to send an F12 via the ssh console to boot the system from the network. As a workaround, press F3 during boot to bring up a menu of boot devices ("BBS POPUP").

Also, I recommend setting Quick Boot to Disabled within Boot/Boot Settings Configuration to give you more time to press the function keys during bootup.

Links

Personal tools