ELOM Notes

From Brandonhutchinson.com

(Difference between revisions)
Jump to: navigation, search
(Links)
Line 36: Line 36:
creating user...
creating user...
create successful
create successful
- 
-
== Links ==
 
- 
-
* [http://docs.sun.com/source/820-0280-12/index.html Integrated Lights Out Manager (ILOM) Administration Guide for ILOM 1.1.1]
 
-
* [http://dlc.sun.com/pdf/820-0280-12/820-0280-12.pdf Integrated Lights Out Manager (ILOM) Administration Guide for ILOM 1.1.1 (pdf)]
 
== Network Boot ==
== Network Boot ==

Revision as of 17:46, 6 February 2008

Contents

Systems

ELOM (Embedded Lights Out Manager) is used on at least the following Sun systems:

  • Sun Fire X2200 M2
  • Sun Fire X2100 M2

Host Management

From Managing the Host:

  • To power on the host, enter the following command:
set /SP/SystemInfo/CtrlInfo PowerCtrl=on
  • To power off the host gracefully, enter the following command:
set /SP/SystemInfo/CtrlInfo PowerCtrl=gracefuloff
  • To power off the host forcefully, enter the following command:
set /SP/SystemInfo/CtrlInfo PowerCtrl=forceoff
  • To reset the host, enter the following command:
set /SP/SystemInfo/CtrlInfo PowerCtrl=reset
  • To reboot and enter the BIOS automatically, enter the following command:
set /SP/SystemInfo/CtrlInfo BootCtrl=BIOSSetup 
  • To start start a session on the server console, enter this command:
start /SP/AgentInfo/console 

User Management

Managing User Accounts

  • You should immediately change the password of the ILOM root account from the default value of changeme when logging into the ILOM command-line interface (CLI).
/SP -> set /SP/User/root Password=password
Set 'Password' to password
  • Adding a user account (CLI).
/SP -> create /SP/User/user
Enter new password: 
Enter new password again: 
creating user...
create successful

Network Boot

The first time you boot a system with ELOM, it will attempt a network boot because there is no OS on its hard disks. However, once an OS is installed, a network boot can be difficult from the ssh console.

I seem to be unable to send an F12 via the ssh console to boot the system from the network. As a workaround, press F3 during boot to bring up a menu of boot devices (i.e., BBS POPUP) and select a network boot device.

Also, I recommend setting Quick Boot to Disabled within Boot/Boot Settings Configuration to give you more time to press the function keys during bootup.

Links

Personal tools